In today’s volatile and topsy-turvy housing market, it’s not a bad idea to add value to your home in new and innovative ways.Don’t just think about renovating a bathroom, consider using radiant heaters to warm towel racks in the bathroom, or a heated floor.Can you think of anything cozier on a chilly winter morning than toasty toes when you step out of the shower?

Not only is radiant heating is one of the most comfortable ways to heat your home, but radiant heaters also offer a surprisingly wide diversity of applications. Radiant heaters can be used in a number of applications, including in tiled areas, hardwood flooring, carpeted areas, cement floors, basements, and garages.

Radiant heaters are a type of heater that warms objects instead of air. Radiant heat uses objects, such as the floor, to heat a home. The air in the room is warmed when it comes into contact with the warmed objects. Heat loss is reduced and the radiant heat remains in the lower part of the room, warmer near feet level and slightly less so at head level, creating the perfect climate for comfort.

Yes, it might take a little effort, but being more environmentally friendly doesn’t have to involve major renovations. Many people waste a lot of energy by not sealing cracks, doors and windows. Checking to make sure a home’s insulation is in good shape and replacing it if it’s not is another good surefire way to stop, prevent, and reverse energy waste.

Quite simply put, radiant heaters are the most efficient form of heat available in today’s market. Significantly less operating time is required to attain and maintain the desired warmth compared to furnaces and other, traditional methods of heating, which keeps operational costs to a minimum.

High efficiency boilers or electric radiant floor systems makes radiant heat one of your most efficient ways to heat your home. Combined with a well-insulated home these systems can quickly warm your home and then shut down or wait idle for long periods of time before being called upon by the thermostat to operate. Don’t waste expensive heating fuel another day.

If you are looking to warm your floors with radiant heaters and are trying to research what kind of radiant heaters to install you might find yourself scratching your head at this point. There are dozens of products available to purchase, and there are even more companies telling you that their product is the best.

So which product is the best? Should you install a hydronic heating system that pumps hot water through your floors, an electric cable heating system, or a low-voltage screen system? The answer lies in the type of project you are doing. Not every system is ideal for every project, but there is an ideal system for every project.

Hydronic Heating Systems   

Hydronic floor heating is the oldest and most popular type of radiant floor heating. These systems are comprised of a boiler or hot water heater, pumps, manifolds, PEX tubing, thermostat, and either gypcrete (a concrete-like material) or wood panels. Hydronic heating is the most complex of all radiant heat systems. These systems require trained professionals to design and perform the installation. Your best economies of scale are achieved for hydronic systems in large areas or entire homes because of their expensive components and operational costs.  Hydronic systems can be installed under any type of flooring. Most hydronic systems require hot water tubing to be installed in a 2-4″ bed of light concrete and are best installed during the initial construction because of its weight load demands and adjustments to floor height. Recent low-mass products have been developed to avoid these challenges by fitting the tubing into pre-cut wood panels, making hydronic systems more convenient and possible for most major remodeling projects.

 If you want to heat smaller areas like a bathroom or kitchen, a hydronic floor heating system may not be the best value for your project. The complexity and cost of installing the system, along with the long-term maintenance and up-keep required, is not worth the small amount you will save in operational costs.

Electric Cable Heating

Electric cable heating systems, often called line- or high-voltage systems, are gaining popularity and are ideal for heating smaller areas (10-300 square feet) like bathrooms, kitchens, and sun rooms. These systems are comprised of a thermostat and a heating cable. On some systems, the cable will be shipped to you as a large spool of cable. These systems are oftentimes less expensive, and give you the ability to space the cable how you want and customize a layout that will heat every square inch of your floor. Other systems have the cable attached to a plastic mesh or tape to create a mat to maintain its proper spacing.

If you’ve ever stayed in a fancy hotel and felt the warm tile beneath your feet you’ve probably wondered how they heat the tile.Well, it’s actually pretty simple using radiant heaters. Radiant heaters are economical, and easy to install.This is how they work.

When a radiant heat system is switched on, energy is forced through a conductive material to create resistance or heat. Majority of the time an electronic line-voltage system is used. This system uses a special thermostat that has an integrated GFCI breaker for safety.

Dry radiant floor systems allow even heating throughout the entire floor. The heat radiates from the floor and warms objects near the floor as opposed to forced hot air that tends to rise to the ceiling. Radiant heaters heat while reducing dust, draft, and noise problems associated with forced air systems. They can be more aesthetically pleasing than other forms of heating because there are no heat registers or radiators to obstruct interior designs. Manufacturers claim radiant floor heating saves 20 to 40 percent on monthly heating bills as compared to the other heating appliances.

Hydronic under floor heating are the most popular form of radiant heaters. This is mainly because these radiant heaters have been around the longest. This form of heating was first used by the Romans, but there have been significant developments since. In the most recent hydronic systems, PEX radiant tubing has been installed in a concrete mass called Gypsum Concrete or “Gypcrete.” This method works very well in most applications, but there have been developments in the installation process of hydronic under floor radiant heaters that make it easier to install for certain situations. This new development is known as a low-mass or modular board underlayment system. Rather than embedding the hot water tubing in concrete, the PEX tubing is laid in the grooves of pre-cut wood panels. This new method is ideal for remodeling and most new construction projects.

Time to treat yourself! Whether you’re building a new home, or updating your current home, you owe it to yourself to check out the comfort that radiant heat has to offer. Now is the perfect time to look into your heating options. Radiant heaters can be used in a number of applications, including some that might surprise you!Among those spots that can use radiant heaters are tiled areas, hardwood flooring, carpeted areas, and even cement floors.

Not only is radiant heating is one of the most comfortable ways to heat your home, but radiant heaters also offer a diversity of applications. We’d be willing to bet that after that first winter with the radiant heaters in place, you may find yourself wondering how you ever got along without them in the past.

What’s interesting here is that, rather than warming the air, radiant heaters are a type of heater that warms objects. Radiant heat uses objects, such as the floor, to heat a home. The air in the room is warmed when it comes into contact with the warmed objects. Heat loss is reduced and the radiant heat remains in the lower part of the room, warmer near feet level and slightly less so at head level, creating the perfect climate for comfort.

Radiant Heaters Tip: Are you looking for efficient, comfortable heat for your home? We think that radiant heating could be just the solution you’ve been looking for.